Customization: | Available |
---|---|
Type: | Lithium Battery |
Charger Type: | Electric Charger |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
42V 2A Electric Scooter Battery Charger | ||||||||
Features | ||||||||
·Universal AC input / Full range | ||||||||
·Plastic or metal case optional | ||||||||
·Cooling by free air convection | ||||||||
·MTBF:30000 hours | ||||||||
·Provide 3 years warranty | ||||||||
·Install fuses on both ends of the Input and Output for double safety | ||||||||
·Protections:Short circuit / Over load / Over voltage / Over temperature | ||||||||
·Meet CEC,DoE Level VI,Energy star,ErP stage 2,CoC Tier 2,NRCan & GEMS | ||||||||
·Certification:UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS,REACH |
MODEL NO. |
FY4201000
|
FY4202000
|
FY4203000
|
FY4204000
|
FY4205000
|
FY4206000
|
FY4207000
|
FY42090000
|
|||
OUTPUT VOLTAGE | 18-29.4V | 18-29.4V | 18-29.4V | 18-29.4V | 18-29.4V | 18-29.4V | 18-29.4V | 18-29.4V | |||
OUTPUT CURRENT | 1A | 2A | 3A | 4A | 4.5A | 6A | 7A | 9A | |||
OUTPUT POWER | 29.4W | 58.8W | 88.2W | 117.6W | 147W | 176.4W | 205.8W | 290W | |||
PFC (MIN.) | 0.6 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | |||
RIPPLE & NOISE (max.) | 290mVp-p | 290mVp-p | 290mVp-p | 290mVp-p | 290mVp-p | 290mVp-p | 290mVp-p | 290mVp-p | |||
INPUT | INPUT VOLTAGE RANGE | 100 ~ 240VAC | |||||||||
FREQUENCY RANGE | 50 / 60Hz | ||||||||||
INPUT POWER | NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 350W MAX , AT RATED OUTPUT . | ||||||||||
TEMPERATURE RISING | CASE 65 ºC MAX .ºC FOR RATED OUTPUT | ||||||||||
EFFICIENCY (MIN) | 88% | ||||||||||
DIELECTRIC WITHSTAND TEST | 5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND | ||||||||||
PROTECTION | OVER LOAD | THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT | |||||||||
SHORT CIRCUIT: | CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY | ||||||||||
ENVIRONMENT | WORKING TEMP RANGE | THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ºC TO + 45 ºC | |||||||||
STORAGE TEMPERATURE | THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ºC TO + 75 ºC | ||||||||||
RESISTANCE TO HEAT | WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3ºC FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM | ||||||||||
RESISTANCE TO MOISTURE | THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ºC AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER. | ||||||||||
SAFETY & EMC | SAFETY STANDARDS | UL60950 EN60335 | |||||||||
EMI | CISPR22 CLASS | ||||||||||
INSULATION | B | ||||||||||
OTHERS | MTBF | THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ºC | |||||||||
CONNECTOR | PLUG | 5521, 5525, RCA, XLR, XT60, M16, C14. | |||||||||
CABLE | UL2464 18# 1M length |